Windows, Screens and Sliding Glass Doors


Contact The Remington Group for reglazing of any windows that break.

 

Acrylic Block

Clean during moderate temperatures with only a mild soap and warm water using a sponge or soft cloth and dry with a towel. Avoid abrasive cleaners, commercial glass cleaner, razors, brushes, or scrubbing devices of any kind. Minor scratches can often be minimized using by rubbing a mild automotive polish.

 

Aluminum

Clean aluminum metal surfaces with warm, clear water. Do not use powdered cleaner. After each cleaning, apply a silicone lubricant. Clean glass as needed with vinegar and water, a commercial glass cleaner, or the product recommended by the window manufacturer.

 

Condensation

Condensation on interior surfaces of the window and frame is the result of high humidity within the home and low outside temperatures. Your family’s lifestyle controls the humidity level within your home. If your home includes a humidifier, closely observe the manufacturer’s directions for its use.

 

Screen Storage and Maintenance

Many homeowners remove and store screens for the winter to allow more light into the home. To make re-installation more convenient, label each screen as you remove it. Use caution: screens perforate easily and the frames bend if they are not handled with care. Prior to re-installing the screen, clean them with a hose and gentle spray of water. 

 

Sills

Window sills in your home are made of wood, wood product, man-made marble, or marble. The most common maintenance activity is dusting. Twice a year, check caulking and touch-up as needed. Wax is not necessary but can be used to make sills gleam. Protect wood and wood product sills from moisture. If you arrange plants on a sill, include a plastic tray under the pot.

 

Sliding Glass Doors

Sliding glass doors are made with tempered glass which is more difficult to break than ordinary glass. If broken, tempered glass breaks into small circular pieces rather than large splinters which can easily cause injury.

Keep sliding door tracks clean for smooth operation and to prevent damage to the door frame. Silicone lubricants work well for these tracks. Acquaint yourself with the operation of sliding door hardware for maximum security.

Under certain lighting conditions, door glass may be hard to see. If you keep the screen fully closed when the glass door is open, your family will be accustomed to opening something before going through.

 

Sticking Windows

Most sliding windows (both vertical and horizontal) are designed for a 10-pound pull. If sticking occurs or excessive pressure is required to open or close a window, apply a silicone lubricant. This is available at hardware stores. Avoid petroleum-based products.

 

Tinting

Applying tinting of foil lining to dual pane windows can result in broken windows due to heat build-up. Some manufacturers void their warranty on the windows if you apply tinting or foil lining. Contact The Remington Group to check on their current policy before you apply such coatings.

 

Weep Holes

In heavy rains, water may collect in the bottom channel of window frames. Weep holes are provided to allow excess water to escape to the outside.

Keep the bottom window channels and weep holes free of dirt and debris for proper operation.

 

The Remington Group Limited Warranty Guidelines

 

We will confirm that all windows, screens, and sliding glass doors are in acceptable condition during the pre-delivery inspection. The Remington Group will repair or replace broken windows or damaged screens noted on the pre-delivery inspection list. Windows should operate with reasonable ease and locks should perform as designed. If they do not, The Remington Group will provide adjustments.

 

Condensation

Condensation on interior surfaces of the window and frame is the result of high humidity within the home and low outside temperatures. You influence the humidity level within your home; The Remington Group provides no corrective measure for this condition.

 

Condensation that accumulates between the panes of glass in dual-glazed windows indicates a broken seal. The Remington Group will replace the window if this occurs during the warranty period.

 

Infiltration

Some air and dust will infiltrate around windows, especially before the installation of landscaping in the general area. The Remington Group warranty excludes this occurrence.

 

Scratches 

The Remington Group confirms that all window glass is in acceptable condition at the pre-delivery inspection. Minor scratches on windows can

result from delivery, handling, and other construction activities. The Remington Group will replace windows that have scratches readily visible from a distance of 4 feet. The Remington Group does not replace windows that have scratches visible only under certain lighting conditions.

 

Tinting

If you add tinting to dual-glazed windows, all warranties are voided. Damage can result from condensation or excessive heat build-up between the panes of glass. Refer to the manufacturer’s literature for additional information.

 

 

CAGBC Logo  Building Green Logo  EQC Logo
© 2014 The Remington Group of Companies. All rights reserved.
All Prices and Specifications subject to change without notice. All items shown are artist's concept. E.& O.E.